HomeResourcesVideo demosReportsReports feature list

Reports

A complete list of the Reports that are included with Verizon Connect Reveal.

Report Scheduling

Automate your reports with Report Scheduling

Yes

Activity Reports

Asset Tracker Battery Report

Provides a snapshot view of the current battery level, location and last check-in time and date for powered and non-powered GPS asset tracking devices.

Yes

Daily Report

The Daily Report gives an easy-to-read version of daily activity for vehicles and drivers, including arrival times, stop details, travel time, distance, idling, and more.

Yes

Detailed Report

A detailed vehicle report that reports on location of vehicle throughout the entire day, engine on-times, drive time and distance traveled.

Yes

Emissions System Report

Shows faults and diagnostic trouble codes (DTCs) associated with vehicle systems that contribute to emissions, as well as a detailed overview of how long a vehicle has been operating with the check engine light on. Fleet managers can use this data to identify systems that need to be repaired before having their vehicles' emissions tested. 

Yes

Geofence Report

Reports on the average visits, most visits, and duration per geofence, as well as unique visits, that can be run per driver, vehicle or group. Fleet managers would typically use this report,to investigate if drivers are going off the scheduled route.

Yes

Cost Analysis Report

The cost analysis report measures vehicle and driver behavior against cost. It calculates the cost to travel to a work location (driver hourly rate, vehicle cost per distance, and fuel) and the cost at that location (fuel idling) for each stop.

Yes

Garmin Stop Report

Provides a list of all stops for chosen vehicles during a selected time frame. The report shows the stop addresses, status, date, time and corresponding vehicle location. Works only on vehicles with registered Garmin devices.

Yes

Power Disruption Report

Allows users to see incidents when the GPS unit has lost power and is unable to be tracked.

Yes

Proximity Report

Helps a customer identify instances when their vehicles were stopped within a specified distance of one another or when a vehicle returned to the same location multiple times. This can help to identify unauthorized activity.

Yes

Sensor Report

Reports on the total number of engine on/off and sensor on/off events per vehicle. It helps determine if a vehicle is operating in a certain mode at a certain location when it’s scheduled to do so.

Yes

Speeding Report

A breakdown of the total number of excessive speeding instances per driver or vehicle, showing the location/time of the violation, the posted speed (legal limit) of the plot, the actual speed travelled, as well as the % above the legal limit.

Yes

Travel And Stops Report

Shows a complete history for a vehicle or vehicles over a specified time, including where the vehicle traveled, how long it took to get there, how long the vehicle was stopped, and at what address. The user can also select to see whether the vehicle's ignition was turned off and how long the vehicle idled at each stop.

Yes

User Activity Report

Provides a daily and summarized usage activity for each account user, such as drivers.

Yes

Vehicle Maintenance Report

Shows all scheduled and/or completed services for a vehicle or vehicles over a specified period of time. Ideal for customers using Reveal to track services performed and scheduled to be performed on their fleet's vehicles.

Yes

Summary Reports

Custom Summary Report

Shows different metrics for drivers, vehicles, and/or groups over a period of time. The report configuration allows the user to group the data by driver, vehicle or group. The ability to filter out specific days or times within the time period is also available (e.g. only show activity between 8:00am-5:00am Monday-Friday for the month of June).

Yes

Distance Travelled Report

Contains driver/vehicle information based on distance accumulated for that day. This information can be further grouped by vehicle, mileage or geofences.

Yes

Exception Report

The Exception Report shows a summary of activities in violation of a customer’s policies. The report can show vehicles that started before or after a specified time, stopped within specified Geofences, had excess idle and other metrics.

Yes

Fleet Summary Report

The Fleet Summary Report offers an in-depth insight into how a fleet is performing. Data displayed includes active days, engine on/off, driving duration, idling duration, distance traveled, maximum speed and number of stops.

Yes

Driver Log Reports

Driver Log Report

This report is linked to ELD. The report shows a series of graphs representing a driver’s day, including off-duty, sleeper berth, driving, and on-duty. Drivers should certify their days on their devices; if they fail to do so, then this report will flag that the day is uncertified.

Yes

ELD Transmission Report

The ELD Transmission Report was designed for use during a Federal Motor Carrier Safety Administration (FMCSA) audit. You can send Driver Logs in a mandated format directly to a predetermined email address set up by the FMCSA for this purpose. Add an Identifier that will be provided by the auditor in the comment box.

Yes

HOS Violations Report

Reports on on Hours of Service (HOS) violations for drivers.

Yes

Vehicle Inspections Report

Reports on vehicle inspections that have been submitted.

Yes

Driving Style Reports

Driving Style Summary Report

Ranks drivers based on their driver behaviors, including speeding and harsh driving metrics.

Yes

Harsh Driving Incident Report

Gives an in-depth look at each driver’s offenses. The report breaks down the harsh driving events including where it took place, the initial speed, duration and the severity of the offense. The report also has the ability to view an event in replay.

Yes

Fuel Reports

Carbon Footprint Report

Estimates the carbon footprint from fuel used and displays the vehicle, year, make, model, fuel type, quantity (amount of fuel), distance traveled, efficiency calculation and estimated CO2.

Yes

Fuel Efficiency Report

Uses fuel purchases and vehicle activity to compare a vehicles' calculated fuel efficiency to what the Environmental Protection Agency (EPA) estimates the efficiency should be.

Yes

Fuel Purchased Report

Shows how much fuel a vehicle or vehicles are using over a specified period of time. This allows a user to analyze costs for their fleet.Fuel card integration needs to be active or fuel transactions can be entered manually.

Yes

Lost Fuel Report

Identifies two types of lost fuel events, including when a vehicle recorded a fuel purchase but that vehicle was not within the radius of a gas station within an hour of the time of purchase, and when the number of gallons purchased by the vehicle exceeded the fuel tank capacity.

Yes

Timecard Reports

Daily Timecard Report

Provides an in-depth breakdown of drivers’ day-to-day journeys, duration, arrival times, stop times, stop locations and idle times.

Yes

Payroll Summary Report

Reports on total hours worked over a week period, itemized daily. The report identifies regular hours from total overtime based on account settings.

Yes

Weekly Timesheet Report

Reports on total hours worked and average hours per day. The report also separates regular hours from total overtime.

Yes

Work Order Reports

Daily Report With Work Orders

Designed to link work order activity to the driver's stops throughout the day that are determined by GPS information.

Yes

Work Order Summary

Shows the total number of work orders, as well as average and total on-site time, for a vehicle or group of vehicles over a period of time. The report configuration allows the user to group the data by vehicle, vehicle group, or work order type.

Yes

Work Order Variance Report

Calculates the difference between how long a driver reports that he/she was working on a work order and how long the vehicle was at the site of the work order.

Yes